Supermicro Web-based Management Utility, Руководство пользователя, Страница: 57 / 64

9-3
Chapter 9: Remote Console
9-2 Drive Redirection Page
The D
RIVE
R
EDIRECTION
page is shown in Table 9-2 and its controls are listed in
Table 9-2 .
Figure 9-2. Drive Redirection Page
To use this function, you need to click the F
LOPPY
hot key button displayed on the upper
right corner of the page.
Click the C
TRL
+A
LT
+D
ELETE
button to send the command C
TRL
+A
LT
+D
ELETE
to the
remote server for execution.
Once you have clicked on the button, it displays a message asking you to confirm if you
really want to send C
TRL
+A
LT
+D
ELETE
. Click Y
ES
to confirm or click C
ANCEL
to cancel
sending the command for remote execution.
Table 9-2. Drive Redirection Page Controls
Item Name Description
1 Connect Drive
Click this button to bring up a window with secondary controls for Local
Drive list, Refresh, Sending Commands and Write Support (see below for
details on these controls).
Once you have clicked C
ONNECT
, users logged into remote servers will
have access to the local drive that you have selected.
2 Connect ISO Click this button to allow you to redirect an CD/DVD ISO image.
3 Disconnect
Click this button to cancel the connection established between a local drive
and a remote server. Once you click this button, the drive you have
selected will not be accessible for remote console interface.
Local Drive List
This pull-down menu displays a list of local drives available for remote
access. Select from the list a local drive that you want to make accessible
for a remote server.
Refresh Click this button to refresh the local drive list.
Write Support
Check this button to allow the remote operating system to have write
access to the drive that you have selected. This function allows a user to
alter, overwrite, erase and destroy data stored in the drive selected and
therefore should only be used on drives with non-critical data. When W
RITE
S
UPPORT
is checked, a warning message will display. Read the warning
message carefully before enabling this function.
Sending Commands
This functions allows the user to issue a pre-defined command to a remote
server for execution.
NOTE: Hot keys are commands that have been pre-defined and pre-stored in a
remote consoles.
1 2 3