Supermicro SuperStorage Server 2028R-NR48N, Руководство пользователя

Страница: 137 / 146

Appendix A: BIOS Error Beep Codes
A-1
Appendix A
BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed at each
system boot, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue to
boot. The error messages normally appear on the screen.
Fatal errors will not allow the system to continue with the bootup procedure. If a fatal
error occurs, you should consult with your system manufacturer for possible repairs.
These fatal errors are usually communicated through a series of audible beeps.
The numbers on the fatal error list correspond to the number of beeps for the
corresponding error.
X10 Serverboard BIOS Error Beep Codes
Beep Code/LED Error Message Description
1 beep Refresh Ready to boot
5 short beeps + 1 long
beep
Memory error No memory detected in the
system
5 beeps No Con-In or No
Con-Out devices
Con-In includes USB or PS/2
keyboard, PCI or Serial Console
Redirection, IPMI KVM or SOL.
Con-Out includes Video
Controller, PCI or Serial Console
Redirection, IPMI SOL.
1 beep per device Refresh 1 beep or each USB device
detected
X10 IPMI Error Codes
1 Continuous Beep System OH System Overheat