171
Appendix FGPUs in 2U Ultra Systems
Figure F-9. Installing a GPU on the Right-side
Route GPU power cable by
this edge of the shroud.
Installing the Air Shroud for the
Right-side GPU (MCP-310-21905-0B)
Notes for Installing in the Right-side Position (1)
•
Break off the necessary portions of the shroud to allow for cables.
•
Position the shroud as shown. The right side wall of the shroud should not cover the right-
most DIMM (P1-DIMMC1). The hole near the center of the shroud fits over the standoff in
the center of the chassis. The left wall of the shroud fits next to CPU2.
•
Routing the GPU power cables:
Connect the cable to GPU_PWR1 on the motherboard
before placing the riser bracket and GPU into the chassis. Guide the cables to the left
between the GPU and the shroud.
Slot for
Shroud Tabs
Break off tabs if
necessary.
