Supermicro SuperServer E403-9D-16C-IP Скачать руководство пользователя

Страница: 19 / 137

Chapter 2: System Installation

Chapter 2

System Installation

2.1 Overview

This chapter provides advice and instructions for mounting the E403-9D-16C-IP to a pole.
Refer to Chapter 3 for details on installing components such as memory, etc.

Warnings

•

Installation work and electrical wiring must be done by qualified person(s) in accordance

with all applicable codes, standards and national wiring regulations.

•

Use this unit only in the manner intended by the manufacturer. If you have questions,
please contact the manufacturer.

•

Install the system in accordance with the instructions in this installation manual. Improper

installation may result in electric shocks or fire.

•

Make sure that all wiring is secured, the specified wires are used, and there is no strain

on the terminal connections or wires.

•

Before serving or cleaning the unit, switch power off and disconnect the power supply.

•

Be sure to use only the specified accessories and parts for installation work.

•

The system shall be not accessible to the general public.

Caution

•

Do not place any objects on/in the system.

•

Do not block air inlets or outlets.

•

Do not install the system in any place where there is a danger of flammable gas leakage.

•

Do not touch the air inlets, outlets, or aluminum fins of the unit.

•

Be aware of any potential risks when installing, inspecting, maintaining, or repairing the
system.

•

Do not topple the system while in transport or storage.

•

Please keep children away from the system.

Содержание SuperServer E403-9D-16C-IP










































































































































Результаты поиска

Содержание SuperServer E403-9D-16C-IP

Отзывы:

Похожие инструкции для SuperServer E403-9D-16C-IP

Бренды по названию

Популярные бренды

Supermicro SuperServer E403-9D-16C-IP, Руководство пользователя

Результаты поиска

Содержание SuperServer E403-9D-16C-IP

Отзывы:

Похожие инструкции для SuperServer E403-9D-16C-IP

Бренды по названию

Популярные бренды