manualshive.com logo in svg

Supermicro SuperServer E300-9C, Руководство пользователя, Страница: 75 / 113

Поделиться
Скачать
Supermicro SuperServer E300-9C Скачать руководство пользователя страница 75

75

Chapter 5   UEFI BIOS 

TPM2.0 UEFI Spec Version

Use this feature to specify the TPM UEFI spec version. TCG 1.2 has support for Windows® 
2012, Windows 8, and Windows 10. TCG 2 has support for Windows 10 or later. The options 
are TCG_1_2 and

 TCG_2

.

Physical Presence Spec Version

Use this feature to select the PPI spec version.

 

The options are 1.2

 

and 

1.3.

TPM2.0 Interface Type

Use this feature to disable or enable Platform Hierarchy (PH) Randomization. The options 
are 

Disabled

 and Enabled.

Device Select

Use this feature to select the TPM version. TPM 1.2 will restrict support to TPM 1.2 devices. 
TPM 2.0 will restrict support to TPM 2.0 devices. Select Auto to enable support for both 
versions. The options are TPM 1.2, TPM 2.0, and 

Auto

.

TXT Support

Intel TXT (Trusted Execution Technology) helps protect against software-based attacks and 

ensures protection, confidentiality, and integrity of data stored or created on the system. Use 

this feature to enable or disable TXT Support. The options are 

Disabled

 and Enabled.

Содержание SuperServer E300-9C


















































































































Отзывы:

Нет отзывов