Supermicro SuperServer E300-8D Скачать руководство пользователя страница 47

Страница: 47 / 107

Chapter 5 BIOS

System Date/System Time

Use this item to change the system date and time. Highlight

System Date

System Time

using the arrow keys. Enter new values using the keyboard. Press the <Tab> key or the arrow

keys to move between fields. The date must be entered in Day MM/DD/YY format. The time

is entered in HH:MM:SS format.

Note:

The time is in the 24-hour format. For example, 5:30 P.M. appears as 17:30:00.

Supermicro X10SDV-TP8F

BIOS Version

This item displays the version of the BIOS ROM used in this system.

Build Date

This item displays the date that the BIOS setup utility was built.

Memory Information

Total Memory

This displays the amount of memory that is available in the system.

Memory Speed

This displays the detected system memory speed.

Содержание SuperServer E300-8D












































































































Результаты поиска

Содержание SuperServer E300-8D

Отзывы:

Supermicro SuperServer E300-8D, Руководство пользователя, Страница: 47 / 107

Результаты поиска

Содержание SuperServer E300-8D

Отзывы: