19
Chapter 2: Maintenance and Component Installation
2.3 Motherboard Components
Processor
The E102-9W-C supports the Intel® Celeron 4305UE Processor.
Memory Support
The X11SWN-C motherboard supports up to 64GB of non-ECC SO-DIMM DDR4 memory
with speeds of up to 2133 MHz in two memory slots.
Note
: Check the Supermicro website for recommended memory modules.
Installing Memory
Caution:
Exercise extreme care when installing or removing DIMM modules to prevent
damage.
SO-DIMM Installation
1. Remove the motherboard from the chassis and carefully turn the motherboard over to
the bottom side.
2. Position the SO-DIMM module's bottom key so it aligns with the receptive point on the
slot.
3. Insert the SO-DIMM module vertically at about a 45 degree angle. Press down until the
module locks into place.
Align
Insert this
end first
Press down until the
module locks into place.
