3-2
SuperServer E100-8Q User's Manual
3-2 Removing the Chassis Covers
The user can remove the rear cover to install the microSD memory card, or the top
cover to install expansion devices or move jumpers.
Removing the Top Cover
1. Power down the system as described in section 3-1.
2. Remove the 20-pin terminal connector.
3. Remove the four screws in the corners of the rear cover.
4. Take off the rear cover.
5. On the front panel, remove the lock nut from the power jack.
6. Remove the four screws in the corners of the front cover and take it off.
7. Slide the top cover toward the rear to release the cover hooks from the chassis.
8. Lift the top cover up and off the chassis.
Figure 3-4. Removing the Chassis Cover
