26
Chapter 3: Maintenance and Component Installation
Figure 3-1. Removing the Chassis Cover
3.2 Accessing the System
The CSE-825BTS chassis features a removable top cover, which allows easy access to the
inside of the chassis.
Removing the Top Cover
1.
2. Remove the two screws on each side of the cover, which secure the cover to the
chassis.
3. Press the release tabs to remove the cover from the locked position. Press both tabs at
the same time.
4. Once the top cover is released from the locked position, slide the cover toward the rear
of the chassis.
5.
Lift the cover off the chassis.
Caution
: Except for short periods of time, do not operate the server without the cover in place.
The chassis cover must be in place to allow for proper airflow and to prevent overheating.
Release Tab
Remove
Screw
Remove
Screw
1
2
2
1
3
4
