Supermicro SuperServer 6048R-TXR, Руководство пользователя

Страница: 61 / 132

Chapter 5: Advanced Serverboard Setup
5-15
5-8 Connector Definitions
Power Connections
A 24-pin main power supply
connector(JPWR1), two 8-pin CPU
power connectors (JPWR2/JPWR3)
and a 4-pin auxilliary power connector
(JPWR4) are provided on the
serverboard. These power connectors
meet the SSI EPS 12V specification
and must be connected to your power
supply to ensure adequate power
supply to your system. See the table
on the right for pin definitions.
Warning : To provide adequate power
supply to the serverboard, be sure to con-
nect the 24-pin connector, the 8-pin power
connectorsand the 4-pin PWR connector
(JPW4) to the power supply. Failure to do
so will void the manufacturer warranty on
your power supply and serverboard.
24-pin Main Power Connector
Pin Definitions
Pin# Definition Pin # Definition
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 COM 3 COM
16 PS_ON 4 +5V
17 COM 5 COM
18 COM 6 +5V
19 COM 7 COM
20 Res (NC) 8 PWR_OK
21 +5V 9 5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 COM 12 +3.3V
Required Connections
12V 8-pin PWR
Pin Definitions
Pins Definition
1~ 4 Ground
5~8 +12V
12V 4-pin PWR
Pin Definitions
Pins Definition
1/2 Ground
3/4 +12V
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. Refer to the table on the right
for pin definitions.
NMI Button
Pin Definitions (JF1)
Pin# Definition
19 Control
20 Ground
Power LED
The Power LED connection is located
on pins 15 and 16 of JF1. Refer to the
table on the right for pin definitions.
Power LED
Pin Definitions (JF1)
Pin# Definition
15 3.3V
16 PWR LED
HDD LED/UID Switch
The HDD LED/UID switch connection
is located on pins 13 and 14 of JF1.
Attach a cable to pin 14 to show HDD
activity status. Attach a cable to pin 13
to use UID button. See the table on the
right for pin definitions.
HDD LED
Pin Definitions (JF1)
Pin# Definition
13 UID Switch
14 HD Active