manualshive.com logo in svg

Supermicro SuperServer 6029TR-HTR, Руководство пользователя, Страница: 106 / 149

Поделиться
Скачать
Supermicro SuperServer 6029TR-HTR Скачать руководство пользователя страница 106

SuperServer 6029TR-HTR User's Manual

106

Default Options

Restore Optimized Defaults

To set this feature, select Restore Defaults from the Save & Exit menu and press <Enter>. 
These are factory settings designed for maximum system stability, but not for maximum 
performance.

Save As User Defaults

To set this feature, select Save as User Defaults from the Save & Exit menu and press 
<Enter>. This enables the user to save any changes to the BIOS setup for future use.

Restore User Defaults

To set this feature, select Restore User Defaults from the Save & Exit menu and press <Enter>. 

Use this feature to retrieve user-defined settings that were saved previously.

Boot Override

Listed in this section are other boot options for the system (i.e., Built-in EFI shell). Select an 
option and press <Enter>. Your system will boot to the selected boot option.

• 

ISATA P0: HGST HUH728080ALE600

• 

ISATA P1: HGST HUH728080ALE600

• 

ISATA P2: HGST HUH728080ALE600

• 

ISATA P3: HGST HUH728080ALE600

• 

ISATA P4: HGST HUH728080ALE600

• 

ISATA P5: HGST HUH728080ALE600

• 

IBA 40-10G Slot 6000 v1066

• 

UEFI: Built-in EFI Shell

Содержание SuperServer 6029TR-HTR






















































































































































Отзывы:

Нет отзывов