Supermicro SUPERSERVER 6028R-E1CR16T, Руководство пользователя

Страница: 88 / 142

6-14
SUPERSERVER 6028TP-DNCR/DNCTR/DNCFR User's Manual
6-10 Expansion Cards
The system supports two full height and one low profile expansion cards for each
node, for a total of six in the system. Installation uses riser cards and riser card
brackets.
Installing Expansion Cards
Installing an Expansion Card
1. Power down the computing node, remove it from the chassis.
2. Remove the riser card bracket. Remove the screw securing the riser card
bracket to the back of the drawer and lift the bracket out of the node drawer.
3. Align the riser card mounting hole to the bracket standoff and secure the riser
card to the bracket using the two screws included in the accessory box. (The riser
card may already be secured onto the bracket, making this step unecessary.)
4. Remove the PCI slot shield on the rear of the drawer by loosening the slot clips.
5. Insert the expansion card into the riser card slot.
Figure 6-12. Installing the Expansion Card
Riser Card
Riser Card
Bracket
Screw
PCI Slot
Shield
Expansion Card