Supermicro SUPERSERVER 6028R-E1CR16T, Руководство пользователя

Страница: 13 / 142

1-3
Chapter 1: Introduction
supports a single QSFP connector is provided on the the X10DRT-PIBF only. The
I/O ports include a VGA (monitor) port, two USB 3.0 ports (additional one internal
USB headers are included on the serverboard), an IPMI dedicated LAN port and
two Ethernet ports.
Note: For IPMI Configuration Instructions, please refer to the Embedded BMC
Configuration User's Guide available at http://www.supermicro.com/support/
manuals/.
Graphics Controller
The X10DRT-P/PT/PIBF features an integrated ASpeed 2400 BMC with an
integrated VGA/2D graphics controller.
InfiniBand
The 6028TP-DNCFR server include a FDR (fourteen data rate) speed InfiniBand
QSFP connector. InfiniBand is a scalable serial communications link intended for
connecting processors with high-speed peripherals.
Other Features
Other onboard features that promote system health include onboard voltage
monitors, a chassis intrusion header, auto-switching voltage regulators, chassis and
CPU overheat sensors, virus protection, node manager software and BIOS rescue.
1-3 Server Chassis Features
The following is a general outline of the main features of the server
chassis.
System Power
The chassis includes dual high-efficiency 80-plus Platinum certified hot-plug power
supply modules, rated at 1680 Watts. Either module can be removed or replaced
without powering down the server.
SAS/SATA/NVMe Subsystem
The supports up to twelve 3.5" hot-swap SAS/SATA/NVMe drives in
trays, six for each node. These drives are hot-swappable units and are connected
to a backplane that provides power and control.