Supermicro SUPERSERVER 6021H, Руководство пользователя, Страница: 39 / 112

Chapter 5: Installation
5-5
5-4 IO Ports
The I/O ports are color coded in conformance with the PC 99 specification.
See Figure 5-2 below for the colors and locations of the various IO ports.
5-5 Installing Processors
Avoid placing direct pressure to the top of the pro
cessor package. Always connect the power cord last
and always remove it before adding, removing or
changing any hardware components.
1. Installing the FCPGA processors:
The P3TDER has two 370-pin sockets, which support single or dual Intel
Pentium
®
III FCPGA 500 MHz-1.50 GHz 512K L2 cache processors at
front bus speeds of 100 and 133 MHz. Lift the lever on the FCPGA
socket and insert the processor (with the heatsink attached) keeping the
notched corner oriented toward pin one on the socket. Make sure the
processor is fully seated in the socket and then close the lever. You
can also install a single processor on the motherboard without changing
any jumper settings. (Install a single processor into the socket marked
"CPU1".) See Figure 5-3 for views of a 370-pin FCPGA socket before
and after processor installation.
!
Figure 5-2. P3TDER Rear Panel IO Ports
Keyboard
(Purple)
USB Ports COM1 Port
(Turquoise)
VGA (Monitor)
Port (Blue)
LAN1 LAN2
Mouse
(Green)
Parallel Port
(Burgundy)