Supermicro SUPERSERVER 6021H Скачать руководство пользователя страница 27

Страница: 27 / 112

Chapter 3: System Interface

3-1

Chapter 3

System Interface

3-1

Overview

There are several LEDs on the control panel as well as others on the SCSI

drive carriers and the motherboard to keep you constantly informed of the

overall status of the system as well as the activity and health of specific

components. There are also two buttons on the chassis control panel and

an on/off switch on the power supply. This chapter explains the meanings

of all LED indicators and the appropriate response you may need to take.

3-2

Control Panel Buttons

There are two push-button buttons located on the front of the chassis.

These are (in order from left to right) a reset button and a power on/off

button.

RESET:

The reset switch reboots the system.

POWER:

This is the main power switch, which is used to apply or

turn off the main system power. Turning off system power with this button

removes the main power but keeps standby power supplied to the system.

(See also the power supply on/off switch in Section 3-5.)

Содержание SUPERSERVER 6021H

















































































































Результаты поиска

Содержание SUPERSERVER 6021H

Отзывы:

Supermicro SUPERSERVER 6021H, Руководство пользователя, Страница: 27 / 112

Результаты поиска

Содержание SUPERSERVER 6021H

Отзывы: