manualshive.com logo in svg

Supermicro SUPERSERVER 6016T-NTRF4+, Руководство пользователя

Поделиться
Скачать
Supermicro SUPERSERVER 6016T-NTRF4+ Скачать руководство пользователя страница 113

Chapter 7: BIOS

7-25

Clear User Password (Available only when User Password has been set)

This item allows you to clear a user password after it has been entered.

 

Password Check

Select Setup for the system to check for a password at Setup. Select Always for the 

system to check for a password at bootup. The options are 

Setup 

and Always.

Boot Sector Virus Protection

When Enabled, the AMI BIOS displays a warning when any program (or virus) is-

sues a Disk Format command or attempts to write to the boot sector of the hard 

disk drive. The options are Enabled and 

Disabled

.

7-5 Boot 

Confi guration

Use this feature to confi gure boot settings. 

Boot Device Priority

This feature allows the user to specify the sequence of priority for the Boot Device. 

The settings are 1st boot device, 2nd boot device, 3rd boot device, 4th boot device, 

5th boot device and Disabled. 

• 

1st Boot Device - [RAID: XXXXXXXXX]

Hard Disk Drive, CD/DVD-ROM Drive, Removable Drive

This feature allows the user to specify the boot sequence from all available hard 

disk drives. The settings are Disabled and a list of all hard disk drives that have 

been detected (i.e., 1st Drive, 2nd Drive, 3rd Drive, etc).

Содержание SUPERSERVER 6016T-NTRF4+



























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды