Supermicro SuperServer 6016T-MT, Руководство пользователя

Страница: 24 / 102

2-8
S
UPER
S
ERVER 6016T-MT User's Manual
2-5 Checking the Motherboard Setup
After you install the 6016T-MT in the rack, you will need to open the unit to make sure
the motherboard is properly installed and all the connections have been made.
Accessing the Inside of the System
Grasp the two handles on either side and pull the unit straight out until it 1.
locks (you will hear a "click").
Depress the two buttons on the top of the chassis to release the top cover. 2.
There is a large rectangular recess in the middle front of the top cover to help
you push the cover away from you until it stops.
Lift the top cover from the chassis to gain full access to the inside of the 3.
server.
Checking the Components
You may have the processor already installed into the system board. The 1.
processor should have its own heatsink attached. See Chapter 5 for instruc-
tions on processor installation.
Your 6016T-MT server system may have come with system memory already 2.
installed. Make sure all DIMMs are fully seated in their slots. For details on
adding system memory, refer to Chapter 5.
If desired, you can install an add-on card to the system. See Chapter 5 for 3.
details on installing a PCI add-on card.
Make sure all power and data cables are properly connected and not blocking 4.
the airfl ow. See Chapter 5 for details on cable connections.