20
Chapter 2: Server Installation
2.5 Installing the Server
1. With one person on either side, lift the system and slide it onto the installed rails.
2. After pushing the enclosure all the way into the rack, use the thumbscrew on each side
of the server to lock it into place.
Figure 2-3. Installing the System into the Rack
Stability hazard. The rack stabilizing mechanism must be in place, or the rack must
be bolted to the floor before you slide the unit out for servicing. Failure to stabilize the
rack can cause the rack to tip over.
Note:
The figure above is for illustrative purposes only. Always install servers at the bottom
of the rack first.
