10
SuperServer 5019C-L/FL User's Manual
Figure 1-1. Control Panel
Control Panel Features
Item
Features
Description
1
Information LED Alerts operator to several states, as noted in the table below
2
NIC2 LED
Indicates network activity on LAN port 2 when flashing
3
NIC1 LED
Indicates network activity on LAN port 1 when flashing
4
HDD LED
Indicates hard drive activity when flashing
5
Power LED
Indicates power is being supplied to the system power supply; illuminated when the
system is operating normally
6
Reset Button
Reboots the system
7
Power Button
Applies or removes power from the power supply to the server; standby power is
maintained
Information LED
Status
Description
Continuously on and
red
An overheat condition has occurred.
(This may be caused by cable congestion.)
Blinking red (1Hz)
Fan failure, check for an inoperative fan.
Blinking red (0.25Hz)
Power failure, check for a non-operational power
supply.
Solid blue
UID has been activated locally to locate the
server in a rack environment.
Blinking blue
UID has been activated using IPMI to locate the
server in a rack environment.
1.4 Chassis Features
Control Panel
Power switches and status LEDs are located on the control panel on the front of the chassis.
1
7
6
5
4
3
2
