manualshive.com logo in svg

Supermicro SuperServer 5018D-LN4T, Руководство пользователя

Поделиться
Скачать
Supermicro SuperServer 5018D-LN4T Скачать руководство пользователя страница 93

Chapter 7: BIOS

7-15

XHCI Hand-Off

This is a work-around solution for operating systems that do not support XHCI (Ex-
tensible Host Controller Interface) hand-off. The XHCI ownership change should be 
claimed by the XHCI driver. The settings are 

Enabled

 and Disabled.

EHCI Hand-Off

This item is for the Operating Systems that do not support Enhanced Host Controller 
Interface (EHCI) hand-off. When this item is enabled, EHCI ownership change will 
be claimed by the EHCI driver. The settings are Enabled and 

Disabled

.

USB 3.0 Support

Select Enabled for USB 3.0 support. The options are Smart Auto, 

Auto

, Enabled, 

Disabled.

EHCI1

Select Enabled to enable EHCI (Enhanced Host Controller Interface) support on 
USB 2.0 connector #1 (at least one USB 2.0 connector should be enabled for EHCI   
support). The options are Disabled and 

Enabled

.

EHCI2

Select Enabled to enable EHCI (Enhanced Host Controller Interface) support on 
USB 2.0 connector #2 (at least one USB 2.0 connector should be enabled for EHCI   
support). The options are Disabled and 

Enabled

.

XHCI Pre-Boot Driver

Select Enabled to enable XHCI (Extensible Host Controller Interface) support on a 

pre-boot drive specified by the user. The options are 

Enabled

 and Disabled.

SATA Configuration

When this submenu is selected, the AMI BIOS automatically detects the presence 
of the SATA devices that are supported by the Intel PCH chip and displays the 
following items:

SATA Controller

This item enables or disables the onboard SATA controller supported by the Intel  
PCH chip. The options are 

Enabled

 and Disabled. 

Configure SATA as

Select IDE to configure a SATA drive specified by the user as an IDE drive. Select 
AHCI  to  configure  a  SATA  drive  specified  by  the  user  as  an AHCI  drive.  Select 
RAID to configure a SATA drive specified by the user as a RAID drive. The options 

are IDE, 

AHCI

, and RAID. 

Содержание SuperServer 5018D-LN4T

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды