Supermicro SuperServer 5018D-LN4T, Руководство пользователя

Страница: 18 / 128

2-4
S
UPER
S
ERVER 5018D-LN4T User's Manual
2-5 Installing the System into a Rack
This section provides information on installing the SC504 chassis into a rack unit.
There are a variety of rack units on the market, which may mean the assembly
procedure will differ slightly. You should also refer to the installation instructions that
came with the rack unit you are using.
Stability Hazard. The rack stabilizing mechanism must be in place, or the
rack must be bolted to the floor before you slide the unit out for servicing.
Failure to stabilize the rack can cause the rack to tip over.
Installing the Chassis into a Standard Rack
1. Confirm that chassis includes the four mounting screws required to mount the
chassis into a rack
2. Align the thru holes of the chassis with the thru holes of the rack.
3. Insert the mounting screws into the thru holes in the front of the chassis and
through the thru holes in the rack and secure.
Figure 2-1. Installing the Chassis into a Rack
Warning: Do not pick up the server with the front handles. They are de-
signed to pull the system from a rack only.