Chapter 6: BIOS
103
User Password
Use this feature to set the user password which is required to enter the BIOS setup utility.
The length of the password should be from 3 characters to 20 characters long.
Password Check
Select Setup for the system to check for a password at Setup. Select Always for the system
to check for a password at bootup or upon entering the BIOS Setup utility. The options are
Setup
and Always.
Secure Boot
When you select this submenu and press the <Enter> key, the following items will display:
•
System Mode
•
Secure Boot
•
Vendor Keys
Attempt Secure Boot
If this item is set to Enabled, Secure Boot will be activated when a Platform Key (PK) is
entered. A Platform Key is a security key used to manage the security settings of the platform
firmware used in your system. The options are Enabled and
Disabled.
Secure Boot Mode
Use this feature to select the desired secure boot mode for the system. The options are
Standard and
Custom
.
Key Management
Provision Factory Default Keys
Select Enabled to install all manufacturer default keys for the following system security
settings. The options are Enabled and
Disabled
.
Install Factor Default Keys
Select Yes to install all manufacturer defaults for the following system security settings. The
options are
Yes
and No.
Enroll EFI Image
Select this item and press <Enter> to select an EFI (Extensible Firmware Interface) image
for the system to operate in Secure Boot mode.
