Supermicro SUPERSERVER 1028R-MCTR, Руководство пользователя, Страница: 38 / 75

Chapter 5: Advanced Serverboard Setup
5-17 5-16
S
UPER
S
ERVER 1028R-MCT/MCTR User's Manual
Fan Header
Pin Definitions
Pin# Definition
1 Ground (Black)
2 +12V (Red)
3 Tachometer
4 PWM_Control
Fan Headers
The X10DRL-CT has eight fan headers
(Fan1-Fan6, FanA and FanB). These are
all 4-pin fan headers, however pins 1-3
are backward compatible with traditional
3-pin fans. Fan speed is controlled via
IPMI based on the system temperature.
Refer to the table on the right for pin
definitions.
Chassis Intrusion
A Chassis Intrusion header is located at
JL1 on the serverboard. Attach the ap-
propriate cable from the chassis to inform
you of a chassis intrusion when the chas-
sis is opened.
Chassis Intrusion
Pin Definitions
Pin# Definition
1 Intrusion Input
2 Ground
Power LED/Speaker
Pins 1-3 of JD1 are used for power LED
indication, and pins 4-7 are for the speak-
er. See the tables on the right for pin
definitions. Please note that the speaker
connector pins (4-7) are used with an
external speaker. If you wish to use the
onboard speaker, you should close pins
6-7 with a jumper.
Power Supply I
2
C Connector
The Power Supply (I
2
C) connector is
located at JPI
2
C1 on the serverboard.
This connector monitors the status of the
power supply, fan and system tempera-
ture. See the table on the right for pin
definitions.
PWR Supply I
2
C
Pin Definitions
Pin# Definition
1 Clock
2 Data
3 PMBUS_Alert
4 Ground
5 3.3V
Trusted Platform Module Header
This header is used to connect a Trusted
Platform Module (TPM), available sepa-
rately from a third-party vendor. A TPM is
a security device that allows encryption
and authentication of hard drives, disal-
lowing access if the TPM associated with
it is not installed in the system. See the
table on the right for pin definitions.
Trusted Platform Module Header
Pin Definitions
Pin # Definition Pin # Definition
1 LCLK 2 GND
3 LFRAME 4 No Pin
5 LRESET 6 VCC5
7 LAD3 8 LAD2
9 VCC3 10 LAD1
11 LAD0 12 GND
13 RSV0 14 RSV1
15 SB3V 16 SERIRQ
17 GND 18 CLKRUN
19 LPCPD 20 RSV2
IPMB
A System Management Bus header
for IPMI 2.0 is located at JIPMB1.
Connect the appropriate cable here
to use the IPMB I
2
C connection on
your system.
IPMB Header
Pin Definitions
Pin# Definition
1 Data
2 Ground
3 Clock
4 No Connection
LSI SAS 3108 TFM Connector
The TFM connector is used to attach a TFM module and SuperCap to the
serverboard for LSI CacheVault technology support.
Speaker Connector
Pin Definitions
Pin# Definition
4 P5V
5 No Connection
6 R_SPKRIN_N
7 R_SPKRIN
PWR LED Connector
Pin Definitions
Pin# Definition
1 JD1_PIN1
2 FP_PWR_LED
3 FP_PWR_LED
PCI-E NVMe AOC I2C Header
Connector JNVI2C1 is a management
header for Supermicro AOC NVme PCI-E
peripheral cards. Please connect the I2C
cable to this connector.