Supermicro SUPERSERVER 1028R-MCTR, Руководство пользователя, Страница: 36 / 75

Chapter 5: Advanced Serverboard Setup
5-13 5-12
S
UPER
S
ERVER 1028R-MCT/MCTR User's Manual
5-8 Connector Definitions
Processor Power
Pin Definitions
Pins Definition
1 through 4 Ground
5 through 8 +12V
ATX Power 24-pin Connector
Pin Definitions
Pin# Definition Pin # Definition
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 COM 3 COM
16 PS_ON 4 +5V
17 COM 5 COM
18 COM 6 +5V
19 COM 7 COM
20 Res (NC) 8 PWR_OK
21 +5V 9 5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 COM 12 +3.3V
Power LED
The Power LED connection is located on
pins 15 and 16 of JF1. Refer to the table
on the right for pin definitions.
Power LED
Pin Definitions (JF1)
Pin# Definition
15 +3.3V
16 PWR LED
HDD LED/UID Switch
The HDD LED/UID switch connection is
located on pins 13 and 14 of JF1. Attach
a cable to pin 14 to show HDD activity.
Attach a cable to pin 13 to use the UID
switch. See the table on the right for pin
definitions.
Power Connectors
The 24-pin main power connector
(J24) is used to provide power to the
serverboard. The 8-pin CPU PWR
connectors (JPWR1/JPWR2) are also
required for processor power. These
power connectors meet the SSI EPS 12V
specification. See the tables on the right
for pin definitions.
Warning : To provide adequate power sup-
ply to the serverboard, be sure to connect
the 24-pin ATX PWR (J24), and
both 8-pin
PWR connectors (JPWR1, JPWR2) to the
power supply. Failure to do so may void the
manufacturer warranty on your power supply
and serverboard.
NMI Button
The non-maskable interrupt button head-
er is located on pins 19 and 20 of JF1.
Refer to the table on the right for pin
definitions.
NMI Button
Pin Definitions (JF1)
Pin# Definition
19 Control
20 Ground
Connector Description
JL1 Chassis Intrusion Header
I-SATA0~5 SATA 3.0 Ports
USB 2/3 USB 2.0 Header
JSD1 Power Connector for DOM (Disk on Module) Device
USB 8/9 USB 3.0 Header
USB4 USB 2.0 Type A Port
JF1 Front Panel Control/LED Header
FAN1~6, FANA/B CPU/System Fan Headers
L-SAS0~3, L-SAS4~7 SAS 3.0 Ports
JTPM1 TPM (Trusted Platform Module) / Port 80 Header
I-SGPIO1/I-SGPIO2 Serial General Purpose I/O Headers 1 and 2
JD1 Speaker/Power LED
JS18 LSI SAS 3108 TFM Connector
JIPMB1 System Management Bus Header
JSTBY1 Standby Power Connector
JUIDB1 UID (Unit ID) Switch
JNVI2C1 PCI-E NVMe AOC I2C Header
JPWR1, JPWR2 8-pin ATX Power Connectors
JPI2C1 Power Supply SMBus I2C Header
J24 24-pin ATX Power Connector
LED Description Color/State Status
LEDPWR Onboard Power LED Green/Solid System Power On
LEDBMC BMC Heartbeat LED Green/Blinking BMC Normal
UID UID Switch Indicator Blue/Steady UID Switch is On
Notes
•
" " indicates the location of Pin 1.
•
Jumpers/LEDs not indicated are for test purposes only.
HDD LED/UID Switch
Pin Definitions (JF1)
Pin# Definition
13 UID Switch
14 HD Active