Supermicro Supero X8DA3 Скачать руководство пользователя страница 68

Страница: 68 / 91

4-10

X8DA3/X8DAi

User’s Manual

will enhance overall system performance by providing direct cache access for data

transferring. The options are Enabled and

Disabled.

NUMA Support

Select Enabled to use the feature of Non-Uniform Memory Access to improve CPU

performance. The options are

Enabled

and Disabled.

Intel VT-d

Select Enabled to enable Intel's Virtualization Technology support for Direct I/O VT-d

by reporting the I/O device assignments to VMM through the DMAR ACPI Tables.

This feature offers fully-protected I/O resource-sharing across the Intel platforms,

providing the user with greater reliability, security and availability in networking and

data-sharing. The settings are Enabled and

Disabled

SouthBridge Confi guration

This feature allows the user to confi gure the settings for the Intel ICH South Bridge

chipset.

USB Functions

This feature allows the user to decide the number of onboard USB ports to be en-

abled. The Options are: Disabled, 2 USB ports, 4 USB ports, 6 USB ports, 8 Ports,

10 Ports and

12 USB ports

Legacy USB Support

Select Enabled to use Legacy USB devices. If this item is set to Auto, Legacy USB

support will be automatically enabled if a legacy USB device is installed on the

motherboard, and vise versa. The settings are Disabled, and

Enabled

USB 2.0 Controller

Select Enabled to activate the onboard USB 2.0 controller. The options are

Enabled

and Disabled. (The manufacturer's default setting is Enabled. This setting cannot

be changed by the user.)

USB 2.0 Controller Mode

This setting allows you to select the USB 2.0 Controller mode. The options are

Hi-Speed (480 Mbps

) and Full Speed (12 Mbps).

BIOS EHCI Hand-Off

Select Enabled to enable BIOS Enhanced Host Controller Interface support to

provide a workaround solution for an operating system that does not have EHCI

Hand-Off support. When enabled, the EHCI Interface will be changed from the BIOS-

controlled to the OS-controlled. The options are Disabled and

Enabled

Содержание Supero X8DA3




























































































Результаты поиска

Содержание Supero X8DA3

Отзывы:

Похожие инструкции для Supero X8DA3

Бренды по названию

Популярные бренды

Supermicro Supero X8DA3, Руководство пользователя

Результаты поиска

Содержание Supero X8DA3

Отзывы:

Похожие инструкции для Supero X8DA3

Бренды по названию

Популярные бренды