Supermicro SuperBlade SBM-GEM-X2C+, Руководство пользователя

Страница: 83 / 404

5-3
Chapter 5: Ethernet Modules
5-2 SBM-GEM-X2C(+) 1/10-Gb Ethernet Switch Module
The SBM-GEM-X2C(+) 1/10-Gigabit Ethernet switch module is a layer 2/3 Ethernet
switch. It includes three 10-Gb/s uplink ports (two CX4 and one SPF+), two 1-Gb/s
uplink RJ45 uplink ports and fourteen (X2C) or twenty (X2C+) 1-Gb/s downlink ports for
the SuperBlade's LAN interfaces. The Ethernet switch module has two internal Ethernet
paths to the CMM(s). The switch is used to provide a connection between the Ethernet
controller integrated on the mainboard and an external Ethernet device. This is a
hot-pluggable module. See
Figure 5-2 , Table 5-4 and Table 5-5 for switch details.
Figure 5-2. SBM-GEM-X2C(+) 1/10-Gigabit Ethernet Switch Module Ports & Indicators
Table 5-4. SBM-GEM-X2C(+) 1/10-Gigabit Ethernet Switch Module Interface
Item Description
1 RS-232 (COM) Serial Port
2 Module Fault LED
3 “Initiation OK” LED
4 Stack ID LEDs (4)
5 10-Gbps Uplink Port Status LEDs (3)
6 1-Gbps RJ45 Uplink Port Status LEDs (Link/Activity and Speed)
7 1-Gbps RJ45 Uplink Ports (2)
8 CX4 10-Gbps Uplink Ports (2)
9 SFP+ 10-Gbps Uplink Port
10 Module Release Handle
6
8
2 3 1
9
7 4 5
10