Supermicro SuperBlade SBM-GEM-X2C+, Руководство пользователя

Страница: 84 / 404

Superblade Network Modules User’s Manual
5-4
LED Indicators
LED indicators for the SBM-GEM-X2C(+) 1/10-Gigabit Ethernet switch module are listed
and described in
Table B-2 of Appendix B .
Ports
The SBM-GEM-X2C(+) 1/10-Gigabit Ethernet switch module contains several
front-mounted ports as described below in
Table 5-6 .
Table 5-5. SBM-GEM-X2C(+) 1/10-Gigabit Ethernet Switch Module Features
Feature Description
Chipset Broadcom BCM56314
Internal/External Ports
Internal: Twenty (X2C+) 1-Gbps downlink ports
External: Two 1-Gbps RJ45 uplink ports and Three 10-Gbps uplink ports (1
SPF+, 2 CX4)
Bandwidth 112-Gbps non-blocking
Trunking Link aggregation support (Full 802.3 ad)
Jumbo Frame Support Up to 9KB
Remote Management Browser-based management or Command Line Interface (CLI)
Protocols
Spanning Tree, Rapid Spanning Tree, Multiple Spanning Tree, IGMP
snooping and 802.1x
Power Consumption ~30.6W
Operating System
Firmware (see Section 3-4: Firmware for the 1/10 Gigabit and 10-Gigabit
Ethernet Switch Modules on page 3-13 for details)
Table 5-6. SBM-GEM-X2C(+) Ports
Port Description
RS-232 Compatible Serial Port
This port accepts an connector cable for uplink using RS-232
connection to a console.
RJ45 Ethernet Ports
These two ports accept a RJ45 connector for 1-Gbps uplink
communications.
CX4 10-Gbps Ports
These two ports accept a CX4 10GBase-CX4 connectors for
10-Gbps uplink communications or for stacking.
SFP+ 10-Gbps Port
This port accepts a SFP+ Direct Attach connector or fiber with SFP+
transceiver for 10-Gbps uplink communications.