SBI-7125B-T1 BIOS Setup Manual
2
Table 1. Main BIOS Setup Menu Options
Menu Option
Description
System Time
To set the system date and time, key in the correct information in the appropriate
fields. Then press the <Enter> key to save the data.
System Date
Using the arrow keys, highlight the month, day and year fields, and enter the
correct data for the system date. Press the <Enter> key to save the data.
BIOS Date
The BIOS Date field displays the date when this version of the BIOS was built.
X
SATA Port 0/
SATA Port 1
These settings allow the user to set the parameters of the SATA Port 0 and 1
drives. Hit <Enter> to activate the following sub-menu screen for detailed options
of these items, and to set the correct configurations accordingly. The items
included in this submenu are shown in
below.
Table 2. SATA Port 0/SATA Port 1 Submenu Menu Options
Menu Option
Description
Type
Selects the type of SATA hard drive. Selecting User will allow the user to
manually enter the parameters of the HDD. Selecting
Auto
will allow the BIOS to
automatically configure the parameters of the HDD. Select CD-ROM if a
CD-ROM drive is installed. Select ATAPI if a removable disk drive is installed.
Total Sectors
This item allows the user to specify the total number of sectors of the drive. This
setting cannot be changed if the Type setting (above) has Auto selected.
Maximum Capacity
This item allows the user to specify the maximum capacity of the drive. This
setting cannot be changed if the Type setting (above) has Auto selected.
Multi-Sector Transfer
This item allows the user to specify the number of sectors per block to be used in
multi-sector transfer. The options are Disabled, 4 Sectors, 8 Sectors and
16
Sectors
.
LBA Mode Control
This item determines whether the BIOS will access the IDE Channel 0 Master
Device via the LBA mode. The options are
Enabled
and Disabled.
32 Bit I/O
This option allows the user to enable or disable the 32-bit data transfer function.
The options are Enabled and
Disabled
.
Transfer Mode
This option allows the user to set the transfer mode. The options are
Standard
,
Fast PIO1, Fast PIO2, Fast PIO3, Fast PIO4, FPIO3/DMA1 and FPIO4/DMA2.
Ultra DMA Mode
This option allows the user to select Ultra DMA Mode. The options are
Disabled
,
Mode 0, Mode 1, Mode 2, Mode 3, Mode 4 and Mode 5.
Parallel ATA
This setting allows the user to enable or disable Parallel ATA. The options are
Enabled and
Disabled
.
Serial ATA
This setting allows the user to enable or disable Serial ATA. The options are
Enabled
and Disabled.
Native Mode
Operation
Used to select the native mode for ATA. The options are
Auto
and Serial ATA.
