Chapter 2: Server Installation
13
2. Squeeze the handle to depress the red section then pull out the blade unit from the
enclosure using the handle.
Note:
Blade Modules can be Hot-Plugged from the enclosure.
Installing a Blade Unit into the Enclosure
Installing a Blade Unit into the Enclosure
1. Slowly push the blade unit into its bay with the handles fully pulled out (see Figure 2-1).
2. When the blade stops, push the handle back into its locked position, making sure the
notches in the handle catches the lip of the enclosure.
Note:
Blade modules can be hot-plugged into the enclosure.
Caution:
Use extreme caution when inserting a blade module into the enclosure. If the blade's
power connector becomes damaged, it can damage pins on other blade bays that it is inserted
into.
Figure 2-1. Inserting a Blade into the Enclosure
