Supermicro SSG-937R-E2CJB, Руководство пользователя

Страница: 20 / 54

3-2
SSG-937R-E2CJB User's Manual
1
2
Overheat/Fan Fail:
When this LED flashes, it indicates a fan failure. When on continuously it indicates
an overheat condition, which may be caused by cables obstructing the airflow in
the system or the ambient room temperature being too warm.
Check the routing of the cables and make sure all fans are present and operating
normally. You should also check to make sure that the chassis covers are installed.
Finally, verify that the heatsinks are installed properly (see Chapter 5). This LED
will remain flashing or on as long as the indicated condition exists.
Cascading Status (IN)
When this LED is illuminated it indicates a cable for cascading from the head node
has been attached to the system.
Cascading Status (OUT)
When this LED is illuminated it indicates a cable for cascading to a second-level
JBOD has been attached to the system.
Power
Indicates power is being supplied to the system's power supply units. This LED
should normally be illuminated when the system is operating.
Heartbeat
The heartbeat LED and indicates that power is being supplied to the serverboard.