Supermicro SC732G-500B, Руководство пользователя

Страница: 53 / 60

4-19
Chapter 4: Chassis Setup and Maintenance
The SC732G chassis includes either a 500 Watt or a 900 Watt power supply. In
the unlikely event that it becomes necessary to replace the power supply, follow
the instructions below.
4-10 Power Supply
Changing the Power Supply
1. Disconnect the power cord from the rear of the power supply and remove the
chassis cover as described in section 4-2.
2. Disconnect the motherboard cables.
3. Remove the screws securing the power supply to the chassis, which are
located on the rear of the chassis. Set these screws aside for later use.
4. Gently slide the power supply out of the chassis.
5. Replace the failed power supply with an identical or compatible power supply
module.
6. Secure the new power supply using the screws previously set aside.
7. Replace the chassis cover, reconnect the power cord and power up the
system
Figure 4-18: Removing the Power Supply
Power Supply