Supermicro SBI-7427R-S3, Руководство пользователя

Страница: 69 / 86

5-13
Chapter 5: BIOS
Recorder Mode
This setting Enables or Disables Recorder Mode. When enabled only text will be
sent. This is to capture Terminal data.
Resolution
100x31
This setting Enables or Disables extended terminal resolution.
Legacy OS
Redirection
Resolution
This allows you to set for legacy OSes the number of rows and columns
supported for redirection. Options include 80x24 or
80x25 .
Putty KeyPad
This setting allows you to select the funtion key and KeyPad to use on the Putty
keyboard. Options include
VT100 , LINUX, XTERMR6, SCO, ESCN or VT400.
Serial Port for Out-of-Band Management/Windows Emergency Management
Services (EMS)
Console Redirection
Use this setting to Enable or Disable Console Redirection for Out-of-Band
Management/Windows Emergency Management Services (EMS).

Console
Redirection Settings
This submenu contains Console Redirection settings for Out-of-Band
Management/Windows Emergency Management Services (EMS). Static display
information for Data Bits, Parity and Stop Bits is also shown in this submenu.
Out-of-Band Mgmt
Port
Microsoft Windows Emergency Managment Services (EMS) allows for remote
managment of a Windows Server OS through a serial port. This setting allows
you to specify which port to use (
COM1 or COM2).
Terminal Type
VT-UTF8 is the preferred terminal type for out-of-band management. The next
best choice is VT100+ and then VT100. Options include ANSI (extended ASCII
character set), VT100 (ASCII character set), VT100+ (extends VT100 to support
color, function keys, etc.) and
VT-UTF8 (uses UTF8 encoding to map Unicode
characters onto one or more bytes).
Bits per Second
This setting selects the serial port transmission speed, which must be matched
on the other side. Long or noisy lines may require lower speeds. Options include
9600, 19200, 57600 and
115200 .
Flow Control
Flow control can prevent data loss from buffer overflow. When sending data, if
the receiving buffers are full, a ‘stop’ signal can be sent to stop the data flow.
Once the buffers are empty, a ‘start’ signal can be sent to re-start the flow.
Hardware flow control uses two wires to send start/stop signals. Options include
None , Hardware RTS/CTS and Software Xon/Xoff.
Table 5-12. ACPI Settings Sub-menu
Menu Option Description
ACPI Sleep State
This setting selects the highest ACPI sleep state the system will enter when the
SUSPEND button is pressed. Options include Suspend Disabled and
S1 (CPU
Stop Clock) .
Numa This setting Enables or Disables Non Uniform Memory Access (NUMA).
High Precision Timer Use this setting to Enable or Disable the High Precision Event Timer.
Table 5-11. Serial Port Console Redirection Sub-menu (Continued)
Menu Option Description