Supermicro SBI-7147R-S4F Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 84

background image

5-7

Chapter 5: BIOS

Power Button
Function

This setting specifies the power button’s function when pressed. Option include 4
Seconds Override or

Instant Off

.

Restore on AC Power
Loss

This setting specifies what the system will do when power is restored after an AC
power loss to the system. Options include

Stay Off

(system power remains off

after power loss), Power-On (system power turns on after power loss) or Last
State (allows the system to resume its last state before the power loss).

Table 5-4. CPU Configuration sub-menu

Menu Option

Description



Socket 1/2/3/4 CPU

Information

These sub-menus, when selected, shows information on the Socket 1/Socket 2/
Socket 3/Socket 4 processors and other information including CPU Signature,
Microcode Patch, CPU Stepping, Max CPU Speed, Min CPU Speed, Processor
Cores, Intel HT Technology, Intel VT-x Technology, L1 Data Cache, L1 Code
Cache, L2 Cache and L3 Cache.

Additionally, the CPU Configuration information shows details about the CPU
Speed and 64-bit support.

This information is only readable and cannot be changed.

Clock Spread
Spectrum

This setting enables or disables spread spectrum modulation. Options are
Enabled and

Disabled

.

RTID

This setting identifies the total number of RTIDs for Local and Remote pools.
Options include

Optimal

and Alternate.

Hyper-threading

This setting is

Enabled

for Windows XP and Linux (OS optimized for

Hyper-threading technology), and Disabled for other OSes (any OS not
optimized for Hyper-threading techology). When Disabled, only one thread per
enabled core is enabled.

Active Processor
Cores

This setting selects the number of cores to enable in each processor package.
Options include

All

, 1, 2, 4 and 6.

Limit CPUID
Maximum

This setting is disabled for Windows XP. Options include Enabled or

Disabled

.

Execute Disable Bit

XD can prevent certain classes of malicious buffer overflow attacks when
combined with a supporting OS such as Windows Server 2003 SP1, Windows
XP SP2, SuSE Linux 9.2 or RedHat Enterprise 3 Update 3. Options include

Enabled

or Disabled.

Intel (R) AES-NI

This setting enables or disables the Processor Advanced Encryption Statndard
(AES) feature for the system. Options include

Enabled

or Disabled.

MLC Streamer
Prefetcher

This setting can be used to turn on/off the Mid Level Cache (L2) streamer
prefetcher. Options include

Enabled

or Disabled.

MLC Spatial Prefetch

This setting can be used to turn on/off the prefetchting of adjacent cache lines.
Options include

Enabled

or Disabled.

DCU Streamer
Prefetcher

For UP platforms, leave this option

Enabled

. For DP/MP servers, this option

may be used to tune performance to the specific application. Options are

Enabled

or Disabled.

DCU IP Prefetcher

This setting

Enables

or Disables prefetch of the next L1 line based upon

sequential load history.

Table 5-3. Boot Feature sub-menu (Continued)

Menu Option

Description

«
...
57
58
59
60
61
...
»

Содержание SBI-7147R-S4F





















































































Отзывы:

Нет отзывов

Похожие инструкции для SBI-7147R-S4F

Бренд: BADODOSECURITY Страницы: 8

Бренд: D+H Страницы: 36

Бренд: D-Box Страницы: 4

Бренд: D+H Страницы: 36

Бренд: Danfoss Страницы: 85

VLT Decentral FCD 300

Бренд: Danfoss Страницы: 112

Бренд: Danfoss Страницы: 4

VLT 6000 series

Бренд: Danfoss Страницы: 27

Бренд: Danfoss Страницы: 16

Бренд: Danfoss Страницы: 20

ADAP-KOOL AK-PC 781

Бренд: Danfoss Страницы: 14

Бренд: Danfoss Страницы: 12

vlt soft starter mcd 500

Бренд: Danfoss Страницы: 96

Бренд: FAAC Страницы: 4

Бренд: FAAC Страницы: 52

Бренд: Fancom Страницы: 31

Бренд: 3M Страницы: 90

Бренд: Samson Страницы: 73

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды