Supermicro SBI-7126T-SH Скачать руководство пользователя страница 48

Страница: 48 / 70

SBI-7126T-SH Blade Module User’s Manual

5-6

Active Processor
Cores

This setting specifies the number of cores to enable in each processor package.
Options include

All

, 1 or 2.

A20M

Legacy OSes and APs may need this setting enabled. Options include E

NABLED

and

Disabled

Intel (R) Speed Step
(TM) tech

This setting allows you to E

NABLE

Disable

GV3.

Intel (R) TurboMode
Tech

This setting allows the processor cores to run faster than the marked frequency
in specific conditions. Options are either

Enabled

or D

ISABLED

Intel (R) C-STATE
tech

This setting allows you to E

NABLE

Disable

the CPU idle setting at C2/C3/C4.

C3 State

This setting allows you to select the Nehalem C state action as either D

ISABLED

ACPI C2

or ACPI C3.

C6 State

This setting allows you to select the Nehalem C state action as either

Enabled

ISABLED

C State package limit
setting

The selected option for this setting will program into C State package limit
register. Options include

Auto

, C1, C3, C6 and C7.

C1 Auto Demotion

When enabled, the CPU will conditionally demote C3/C6/C7 requests to C1
based on uncore auto-demote information. Options include

Enabled

and

ISABLED

C3 Auto Demotion

When enabled, the CPU will conditionally demote C6/C7 requests to C3 based
on uncore auto-demote information. Options include

Enabled

and D

ISABLED

Spread Spectrum
Mode

This setting allows you to E

NABLE

Disable

Spread Spectrum Mode in your

system.

Table 5-4. IDE Configuration Menu

Menu Option

Description

SATA#1
Configuration

If Compatible is selected, this sets SATA#1 to legacy compatibility mode.
Selecting Enhanced sets SATA#1 to native SATA mode. The options are

, C

OMPATIBLE

and

Enhanced

Configure SATA#1 as

This setting allows you to select the drive type for SATA#1. The options are

IDE

and AHCI. Choosing the RAID or AHCI changes which further menu options
appear on the screen.

SATA#2
Configuration

Selecting Enhanced sets SATA#2 to native SATA mode. The options are
D

ISABLED

and

Enhanced



Primary/Secondary/

Third/Fourth IDE
Master/Slave

This submenu contains IDE Master/Slave settings.

Type

This setting specifies the type of device connected to the system. Options
include

Auto

, CD/DVD and ARMD.

LBA/Large Mode

This setting allows you to enable/disable LBA Mode. Options include D

ISABLED

and

Auto

, which enables LBA mode if the device supports it and the device is

not already formatted with LBA mode disabled.

Table 5-3. CPU and Clock Configuration Sub-menu (Continued)

Menu Option

Description

Содержание SBI-7126T-SH







































































Результаты поиска

Содержание SBI-7126T-SH

Отзывы:

Похожие инструкции для SBI-7126T-SH

Бренды по названию

Популярные бренды

Supermicro SBI-7126T-SH, Руководство пользователя

Результаты поиска

Содержание SBI-7126T-SH

Отзывы:

Похожие инструкции для SBI-7126T-SH

Бренды по названию

Популярные бренды