Supermicro SBI-7126T-SH, Руководство пользователя

Страница: 13 / 70

1-3
Chapter 1: Introduction
Memory
The SBI-7126T-SH blade module has twelve 240-pin DIMM sockets that can support up
to 192 GB of ECC Registered ECC and 48 GB of Unbuffered ECC DDR3-1333/1066/
800 SDRAM. Both interleaved and non-interleaved memory are supported, so you may
populate any number of DIMM slots.
Please refer to the Supermicro web site for a list of supported memory
(
www.supermicro.com/products/superblade ). The detailed specifications for a blade
module will contain a link to a list of recommended memory sizes and manufacturers.
Details on installation of memory modules into the SBI-7126T-SH blade module are
found in
Chapter 3: "Setup and Installation" on page 3-1 .
Storage
The SBI-7126T-SH blade module can have two 2.5" SAS2 or SATA (Serial ATA) hard
disk drives in front-mounted easy removable carriers. See
Chapter 3: "Setup and
Installation" on page 3-1 for storage installation details.
Table 1-2. RDIMM Population for the SBI-7126T-SH w/5500 Processors Installed
DIMM Slots
per
Channel
DIMMs
Populated
per
Channel
DIMM Type (Reg.
= Registered)
Speeds (in MHz)
Ranks per DIMM
(any combination;
SR=Single Rank,
DR=Dual Rank,
QR=Quad Rank)
3 1 Reg. DDR3 ECC 800,1066,1333 SR or DR
3 1 Reg. DDR3 ECC 800,1066 QR
3 2 Reg. DDR3 ECC 800,1066 Mixing SR, DR
3 2 Reg. DDR3 ECC 800 (Note) Mixing SR, DR, QR
3 3 Reg. DDR3 ECC 800 (Note) Mixing SR, DR
Note: 1066 RDIMMs will run at 800 MHz (-BIOS automatic downgrading)
Table 1-3. UDIMM Population for the SBI-7126T-SH w/5500 Processors Installed
DIMM Slots
per
Channel
DIMMs
Populated
per
Channel
DIMM Type (Reg.
= Registered)
Speeds (in MHz)
Ranks per DIMM
(any combination;
SR=Single Rank,
DR=Dual Rank,
QR=Quad Rank)
3 1
Unbuffered DDR3
ECC/Non-ECC
800,1066,1333 SR or DR
3 2
Unbuffered DDR3
ECC/Non-ECC
800,1066 Mixing SR, DR
3 3 Not Available Not Available Not Available