Supermicro SBA-7141M-T, Руководство пользователя

Страница: 23 / 66

3-5
Chapter 3: Setup and Installation
8. Place the heatsink on the processor then tighten two diagonal screws until snug,
then the other two screws.
9. When all four screws are snug, tighten them all to secure the heatsink to the
mainboard.
10. Replace the cover on the blade unit and finish by installing the unit back into the
blade enclosure.
Figure 3-3. Installing a Processor in a Socket
3-4 Onboard Battery Installation
A battery is included on the mainboard to supply certain volatile memory components
with power when power has been removed from the blade module. If this battery dies, it
must be replaced with an equivalent CR2032 Lithium 3V battery. Dispose of used
batteries according to the manufacturer's instructions. See
Figure 3-4 for a diagram of
installing a new onboard battery.
NOTE: Do not overtighten the screws as this may damage the processor or the
heatsink.
WARNING: There is a danger of explosion if the onboard battery is installed
upside down, which reverses its polarities.
Gold dot
Socket key
CPU key
Notched corner
CPU pin