Supermicro SBA-7141M-T, Руководство пользователя

Страница: 14 / 66

SBA-7141M-T Blade Module User’s Manual
1-2
1-3 Blade Module Features
Table 1-1 lists the main features of the SBA-7141M-T blade module. See the proceeding
section for components typically included in a blade system and other optional
components. Specific details on the SBA-7141M-T blade module is found in
Chapter 4:
"Blade Module Features" on page 4-1 .
Processors
The SBA-7141M-T blade module supports up to four AMD Opteron 8300/8200 series
processors.
Refer to the Supermicro web site for a complete listing of supported processors ( http://
www.supermicro.com/products/superblade ). Please note that you will need to check the
detailed specifications of a particular blade module for a list of the CPUs it supports.
Details on installation of the processor into the SBA-7141M-T blade module are found in
Chapter 3: "Setup and Installation" on page 3-1 .
Memory
The BHQME supports single or dual-channel, registered ECC DDR2-800/667/533
SDRAM in sixteen DIMM sockets. Both interleaved and non-interleaved memory are
supported, so you may populate any number of DIMM slots. Populating two adjacent
slots at a time with memory modules of the same size and type will result in interleaved
(128-bit) memory, which is faster than non-interleaved (64-bit) memory.
Please refer to the Supermicro web site for a list of supported memory
(
www.supermicro.com/products/superblade ). The detailed specifications for a blade
module will contain a link to a list of recommended memory sizes and manufacturers.
Details on installation of memory modules into the SBA-7141M-T blade module are
found in
Chapter 3: "Setup and Installation" on page 3-1 .
Table 1-1. SBA-7141M-T Blade Specification Features
Mainboard
BHQME (proprietary form factor)
Chassis Dimensions (HxWxD): 11.32” x 1.67” x 18.5”
Processors
Supports four AMD Opteron 8300/8200 series processors. Please refer to
our web site for a complete listing of supported processors.
FSB Speed 1000 MHz Hyper Transport front side (system) bus speed
Chipset Nvidia MCP55 Pro
Graphics Controller Onboard ATI ES1000 graphics chip with 16MB of SDRAM
BIOS 8 Mb AMI
®
Flash ROM
Memory Capacity
Eight 240-pin DIMM sockets supporting up to 128 GB of ECC Registered
DDR2-800/667/533 SDRAM.
SATA Controller Nvidia MCP55 Pro on-chip controller for two Serial ATA drives
Hard Drive Bays One Internal 2.5" SATA hard disk drive