Supermicro P9DSU-C, Руководство пользователя

Страница: 46 / 72

Chapter 2: Installation
2-25
Power Button
OH/Fan Fail LED
1
NIC1 Link LED
Reset Button
2
Power Fail LED
HDD LED
FP PWRLED
Reset
PWR
3.3 V
3/3V Stby
UID LED Blue Cathode
Ground
Ground
19 20
3.3V
X
Ground
NMI
X
NIC2 Link LED
NIC2 Activity LED
NIC1 Activity LED
B
A
Power Fail LED
The Power Fail LED connection is located on pins 5 and 6 of JF1. Refer to the
table below for pin definitions.
PWR Fail LED
Pin Definitions (JF1)
Pin# Definition
5 3.3V
6 PWR Supply Fail
Overheat (OH)/Fan Fail/PWR Fail/UID LED
Connect an LED cable to pins 7 and 8 of Front Control Panel to use the Overheat/
Fan Fail/Power Fail and UID LED connections. The Red LED on pin 8 provides
warnings of overheating, fan failure or power failure. The blue LED on pin 7 works
as the front panel UID LED indicator. Refer to the tables below for pin definitions.
OH/Fan Fail/ PWR Fail/Blue_UID
LED Pin Definitions (JF1)
Pin# Definition
7 Blue_UID LED
8 OH/Fan Fail/Power Fail
OH/Fan Fail/PWR Fail
LED Status (Red LED)
State Definition
Off Normal
On Overheat
Flashing Fan Fail
A. OH/Fail/PWR Fail LED
B. PWR Supply Fail
REV:1.10
P9DSU-C
MAC CODE BAR CODE IPMI CODE