Chapter 2: Installation
2-5
REV:1.10
P9DSU-C
MAC CODE
BAR CODE IPMI CODE
2-3 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis.
Make sure that the locations of all the mounting holes for both motherboard and
chassis match. Although a chassis may have both plastic and metal mounting fas-
teners, metal ones are highly recommended because they ground the motherboard
to the chassis. Make sure that the metal standoffs click in or are screwed in tightly.
Then use a screwdriver to secure the motherboard onto the motherboard tray.
Tools Needed
•
Phillips Screwdriver
•
Pan head screws (14 pieces)
•
Standoffs (14 pieces, if needed)
Location of Mounting Holes
There are thirteen (13) mounting holes on this motherboard indicated by the arrows.
Notes:
1.
To avoid damaging the motherboard and its components, please do not
use a force greater than 8 lb/inch on each mounting screw during motherboard
installation.
2.
Some components are very close to the mounting holes. Please
take precautionary measures to prevent damage to these components when
installing the motherboard to the chassis.
Содержание P9DSU-C
Страница 1: ...USER S MANUAL Revision 1 0 P9DSU C...
Страница 35: ...2 14 Super P9DSU C Motherboard User s Manual Minimum Boot Up...
Страница 36: ...Chapter 2 Installation 2 15 Recommended Configuration...
Страница 37: ...2 16 Super P9DSU C Motherboard User s Manual...