E-2
SUPER P5MMA98/P5MMS98/P5MMA2/P5MMS2 User’s Manual
3.
INTR #2 Error — The interrupt channel #2 has failed
the POST routine.
4.
CMOS Battery State Low — There is a battery in
your system which is used for storing the CMOS
values. This battery appears to be low in power and
needs to be replaced.
5.
CMOS Checksum Failure — After the CMOS values
are saved, a checksum value is generated to provide
for error checking. If the previous value is different
from the value currently read, this error message
appears. To correct this error, you should run BIOS
SETUP Program.
6.
CMOS System Options Not Set — The values stored
in the CMOS are either corrupt or nonexistent. Run
the BIOS SETUP Program to correct this error.
7.
CMOS Display Type Mismatch — The type of video
stored in CMOS does not match the type detected by
the BIOS. Run the BIOS SETUP Program to correct
this error.
8.
Display Switch Not Proper — Some systems require
that a video switch on the motherboard be set to
either color or monochrome, depending upon the
type of video you are using. To correct this situation,
set the switch properly. (Remember to shut down
the system first.)
9.
Keyboard is Locked...Unlocked It — The keyboard
lock on the system is engaged. The system must be
unlocked to continue the boot-up procedure.
