Supermicro P4SCA, Руководство пользователя

Страница: 55 / 96

Chapter 4: BIOS
4-9
Onboard Serial Port1/Onboard Serial Port2
This setting allows the user to set the address and the corresponding IRQ
for the Serial Port1 and Serial Port 2. The options are "Disabled" , "3F8/
IRQ4", "2F8/IRQ3", "3E8/IRQ4", "2E8/IRQ3", and "Auto". The default setting
for Serial Port1 is " 3F8/IRQ4 " and the default for Port 2 is " 2F8/IRQ3 ".
UART Mode Select
This setting allows the user to select the UART mode for the BIOS. The
options are "IrDA", "ASKIR" and " Normal ".
RxD, TxD Active
This allows the user to change the settings for the "RxD, TxD Active"
function. The options are "Hi, Hi", " Hi, Lo ", "Lo, Hi", and "Lo, Lo".
IR Transmission Delay
If "Enabled", the transmission of IR (infrared) signals will be delayed. The
options are " Enabled " and "Disabled".
UR2 Duplex Mode
This setting set the mode for the UR2 Duplex Mode. The options are "Full"
and " Half ".
Use IR Pins
This item sets the usage of the IR pins. The options are "RxD2, TxD2" and
" IR-Rx2Tx2 ".
Onboard Parallel Port
This setting allows the user to set the address and the corresponding IRQ
for the onboard parallel port. The options are "Disabled", " 378/IRQ7 ", "278/
IRQ5" and "3BC/IRQ7".