Supermicro P4SCA, Руководство пользователя

Страница: 19 / 96

Chapter 1: Introduction
1-13
1-2 Chipset Overview (Intel's 875 Canterwood
Chipset)
Intel’s 875 Canterwood Chipset contains the following main components:
the 875 Canterwood Memory Controller Hub (MCH) and the I/O Controller
Hub 5(ICH5R). These two components are interconnected via Hub Inter-
face.
Memory Controller Hub (MCH)
The 875 Canterwood Memory Controller Hub (MCH) is designed to support
Intel PGA 478-pin Processors. The function of the 875 Canterwood MCH is
to arbitrate the flow of data transfer between system bus (FSB), system
memory, and Hub Interface. The Canterwood MCH supports 800 MHz FSB,
400/333 Memory Interface, 533 MHz FSB, 333/266 Memory Interface, and
400 MHz FSB 266 MHz Memory Interface.
System Memory Interface
The 875 Canterwood Memory Controller (MCH) supports two 64-bit wide
DDR data channels with bandwidth up to 6.4 GB/s (DDR400) in dual channel
mode. It supports 128-Mb, 256-Mb,512-Mb, x8, X16 DDR. Maximum system
memory supports up to 4.0 GB for Dual-Channel. ECC/Non ECC unbuffered
DDR DIMMs are supported, but it does not support registered, mixed-mode
DIMMs.
Intel ICH5R System Features
The I/O Controller Hub provides the I/O subsystem with access to the rest
of the system. It supports 2-channel Ultra ATA/100 Bus Master IDE Control-
ler, two Serial ATA (SATA) Host Controllers, SMBus 2.0 Controller, LPC/
Flash BIOS Interface, PCI 2.3 Interface, and Integrated System Management
Controller.