Supermicro Optane Persistent Memory 200 Series Скачать руководство пользователя

Страница: 54 / 54

Super Intel® Optane™Persistent Memory 200 Series Configuration User's Guide

Destroy Namespace

Use the

ndctl destroy-namespace X

command to destroy the namespace of the user’s

choice.

represents the namespace on the active namespaces list.

List Active Regions

Use

ndctl list -R

to display the active regions list.

Delete Region

Use the

ndctl disable-region X

command to delete the region of the user’s choice.

represents the region on the active regions list.

N.1. List Active Namespaces (CentOS)

O.1. Disable Namepace namespace0.0 (CentOS)

O.2. Destroy Namepace namespace0.0 (CentOS)

Содержание Optane Persistent Memory 200 Series























































Результаты поиска

Содержание Optane Persistent Memory 200 Series

Отзывы:

Похожие инструкции для Optane Persistent Memory 200 Series

Бренды по названию

Популярные бренды

Supermicro Optane Persistent Memory 200 Series, Руководство пользователя

Результаты поиска

Содержание Optane Persistent Memory 200 Series

Отзывы:

Похожие инструкции для Optane Persistent Memory 200 Series

Бренды по названию

Популярные бренды