Supermicro MicroBlade MBM-GEM-004, Руководство пользователя для веб

Страница: 95 / 164

Release: 1.0
95 / 164
MBM-GEM-004 Switch Web User Guide
4.7.7 MSTP Port Configuration
The CIST Settings link opens the CIST Settings page. The configuration per Port related to
MSTP can be done through this page. You are allowed to configure the following:
Port – Specifies the port identifier.
Path Cost – Specifies the path cost associated with this port. Path cost values from 0 to
200000000. The default path cost is calculated based on the port speed.
Priority – Specifies the port priority used in role selection. Port priority values from 0 to 240. The
default priority value is 128.
Point-to-Point Status - User can configure the ports explicitly as point-to-point (Force true), or
Non-point-to-point port or leave the decision to be made dynamically (from AL or MAC layer).
Edge Port - This must be configured, if the corresponding port is an edge port.
MSTP Status – Specifies the MSTP protocol status that can be enabled/disabled on the
particular port.
Protocol Migration - This is to control the migration among MSTP, RSTP and STP protocols, if
the other side of the switch runs a different mode. Migration takes place only if this is enabled.
Hello Time (Seconds) - Specifies administrative value of hello time for the port. Hello time may
be 1 or 2 seconds. The default value is 2.
Auto Edge Status -
If set to true, the edge port status will be dynamically calculated.
Restricted Role – Specifies the Restricted role status of the port.
Restricted TCN – Indicates the Restricted TCN status of the port.