Supermicro H8DGU-LN4F+, Руководство пользователя

Страница: 26 / 82

H8DGU-LN4F+ Serverboard User's Manual
2-6
Triangle
3. Use your thumb and your index
fi nger to hold the CPU. Locate
and align pin 1 of the CPU socket
with pin 1 of the CPU. Both are
marked with a triangle.
4. Align pin 1 of the CPU with pin
1 of the socket. Once aligned,
carefully place the CPU into the
socket. Do not drop the CPU
on the socket, move the CPU
horizontally or vertically or rub
the CPU against the socket or
against any pins of the socket,
which may damage the CPU and/
or the socket .
5. With the CPU inserted into the
socket, inspect the four corners
of the CPU to make sure that it is
properly installed and fl ush with
the socket. Then, gently lower
the silver CPU retention plate into
place.
6. Carefully press the CPU socket
lever down until it locks into its
retention tab. For a dual-CPU
system, repeat these steps to
install another CPU into the
CPU#2 socket (and into CPU#2,
CPU#3 and #4 sockets for a
quad-CPU confi guration).
Note: In single and dual-CPU confi gurations, memory must be installed in the DIMM
slots associated with the installed CPU(s). Memory is limited to a maximum of 384
GB for single CPU and 768 GB for dual CPU confi gurations.