Supermicro FatTwin F627G2-F73+ Скачать руководство пользователя страница 134

Страница: 134 / 146

7-22

FatTwin

F627G2-FT+/FTPT+/F73+/F73PT+ USER'S MANUAL



Trusted Computing (Available when a TPM device is detected

by the BIOS)

Confi guration

TPM Support

When this feature is set to Enabled, and the onboard TPM is also set to Enabled,

you can use TPM support to improve data integrity and network security for your

system. The options are

Enabled

and Disabled.

TPM State

Select Enabled to enable TPM security settings to improve data integrity and

network security. The options are Disabled and

Enabled

Pending Operation

Use this item to schedule an operation for the security device. The options are

None

, Enable Take Ownership, Disable Take Ownership, and TPM Clear.

Note:

Upon system reset, the computer will reboot in order to execute the

pending operation and change the state of the security device.

Current Status Information:

This item displays current TPM status.

TPM Enable Status

This item indicates if TPM is currently enabled or disabled.

TPM Active Status

This item indicates if TPM is currently active or not.

TPM Owner Status

This item displays the status of TPM Ownership.



ME Subsystem

Intel ME Subsystem Confi guration

This feature displays information on the Intel Management Engine subsystem:

•

ME BIOS Interface Version

•

ME Version

Содержание FatTwin F627G2-F73+



















































































































































Результаты поиска

Содержание FatTwin F627G2-F73+

Отзывы:

Бренды по названию

Популярные бренды

Supermicro FatTwin F627G2-F73+, Руководство пользователя

Результаты поиска

Содержание FatTwin F627G2-F73+

Отзывы:

Бренды по названию

Популярные бренды