manualshive.com logo in svg

Supermicro Desktop 5130DQ-IL, Руководство пользователя

Поделиться
Скачать
Supermicro Desktop 5130DQ-IL Скачать руководство пользователя страница 62

Desktop 5130DQ-IL User's Manual

62

The following will be displayed:

• 

SA PCIe Code Version

• 

VT-d Capability

PEG Port Configuration

PEG 0:1:0

Enable Root Port

Select Enable to activate the Root Port. The options are Disabled, Enabled, and 

Auto

.

Max Link Speed

Select 

Auto

, Gen1, Gen2, or Gen3 to set the PEG Max Link Speed. 

PEG0 Slot Power Limit Value

This option sets the upper limit of the power supplied by the slot (in Watts). It is calculated 
by multiplying this value by the Slot Power Limit Scale. Valid range is from 0-255. 

PEG0 Slot Power Limit Scale

This option sets the scale of the Slot Power Limit Value (above). The options are 

1.0x

, 0.1x, 

0.01x, and 0.001x. 

PEG0 Physical Slot Number

This option sets the physical slot number attached to this port. The number has be globally 
unique within the chassis. Valid range is from 0-8191. 

PEG 0:1:1

Enable Root Port

Select Enable to activate the Root Port. The options are Disabled, Enabled, and 

Auto

.

Max Link Speed

Select 

Auto

, Gen1, Gen2, or Gen3 to set the PEG Max Link Speed. 

PEG1 Slot Power Limit Value

This option sets the upper limit of the power supplied by the slot (in Watts). It is calculated 
by multiplying this value by the Slot Power Limit Scale. Valid range is from 0-255. 

PEG1 Slot Power Limit Scale

This option sets the scale of the Slot Power Limit Value (above). The options are 

1.0x

, 0.1x, 

0.01x, and 0.001x. 

Содержание Desktop 5130DQ-IL












































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды