Chapter 5: BIOS
61
to map Unicode characters into one or more bytes. The options are ANSI, VT100, VT100+,
and
VT-UTF8
.
Bits per second
This item sets the transmission speed for a serial port used in Console Redirection. Make
sure that the same speed is used in both host computer and the client computer. A lower
transmission speed may be required for long and busy lines. The options are 9600, 19200,
57600, and
115200
(bits per second).
Flow Control
Use this item to set the flow control for Console Redirection to prevent data loss caused by
buffer overflow. Send a "Stop" signal to stop data sending when the receiving buffer is full.
Send a "Start" signal to start data sending when the receiving buffer is empty. The options
are
None
, Hardware RTS/CTS, and Software Xon/Xoff.
The setting for each these features is displayed:
•
Data Bits
•
Parity
•
Stop Bits
System Agent (SA) Configuration
