manualshive.com logo in svg

Supermicro CSE-836BE1C-R609JBOD, Руководство пользователя

Поделиться
Скачать
Supermicro CSE-836BE1C-R609JBOD Скачать руководство пользователя страница 32

SC836B JBOD Chassis Manual

3-2

3-3  Control Panel LEDs

There are four LEDs that provide status information about the system. The HDD 
activity LED and the NIC2 LED are not used in the JBOD system. 

Power

Indicates power is being supplied to the system power supply units. This LED is 
illuminated when the system is operating normally. 

Power

The main power switch applies or removes primary power from the power supply 
to the server but maintains standby power. To perform most maintenance tasks, 

unplug the system to remove all power. Section 4-2 further describes power on/off.

(UID and BMC) Reset Button

• 

Press briefly to toggle the UID alert light. The blue LED will blink.

• 

Press and hold 6 seconds to set the BMC IP address to 192.168.1.99. The 
blue LED will blink.

• 

Press and hold 12 seconds to restore factory defaults. The blue LED will remain 
on.

3-2  Control Panel Buttons

The chassis includes two push-buttons that control the system.

Содержание CSE-836BE1C-R609JBOD





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды