32
Supermicro SC815B Chassis Series User's Manual
Installing the Backplane into the Chassis
1. Power down the system and unplug the power cords from the rear of the power supply
modules. Remove the chassis from the rack and seat it on a work bench (safety area).
Then open the chassis cover as described in section 3.2.
2.
Lower the backplane into the chassis sliding it into the clips on the floor of the chassis
and aligning the mounting holes in the backplane, with the mounting holes in the
chassis.
3. Secure the backplane to the chassis using the two screws provided with the backplane.
4. Connect the wiring to the backplane.
5. Replace the chassis cover, plug the power cords into the rear of the power supply
modules and power up the system.
Figure 3-8. Installing the Backplane
1
3
